Short Description

Model No.: UNS-S32750-WN-RF-Flange-6-Inch-Sch80-CL300

China Welding Neck Flange Manufacturer www.metallicsteel.com offers Nonstandard ASME B16.5 A182 UNS S32750 WN RF Flange, 6 Inch, Sch80, CL300, RF=4MM.

Request a quote Share

Key Specifications / Features

Type: Nonstandard WN RF Flange
Material: F53 (2507/UNS S32750)
Pressure: 300# (CL300)
Size: DN150 (6″)
Standard: ASME B16.5
Flange Facing Type: Raised Face (RF)

20201016233843 22057 - Nonstandard ASME B16.5 A182 UNS S32750 WN RF Flange 6 Inch Sch80 CL300 RF=4MM

Composition ranges for F53 (2507/UNS S32750) grade stainless steels

Grade Chemistry (Typical Values) Mechanicals
Specification Cr Ni Mo

Cu

Max

N

Max

Si

Max

Mn

Max

P
max
S
max
C
max

Fe

Proof Stress 0.2% (MPa) Tensile Strength (MPa) Elongation A5 (%) Hardness
HB (max)
Hardness HBR (max)
2507 24.0-26.0 6.0-8.0 3.0-5.0 0.75 0.24-0.32 0.80 1.20 0.035 0.020 0.030 Bal 550 795 15 310 32

201673065652996676 - Nonstandard ASME B16.5 A182 UNS S32750 WN RF Flange 6 Inch Sch80 CL300 RF=4MM

ANSI, ASME, ASA B16.5 300lb/sq.in. WELDING NECK FLANGE RF
ø D b g m a J* h k Holes l Kg.
1/2″ 95,2 14,3 34,9 38,1 21,3 15,7 52,4 66,7 4 15,9 0,900
3/4″ 117,5 15,9 42,9 47,6 26,7 20,8 57,1 82,5 4 19,0 1,500
1″ 123,8 17,5 50,8 54,0 33,5 26,7 61,9 88,9 4 19,0 1,900
1 1/4″ 133,3 19,0 63,5 63,5 42,2 35,1 65,1 98,4 4 19,0 2,600
1 1/2″ 155,6 20,6 73,0 69,8 48,3 40,9 68,3 114,3 4 22,2 3,300
2″ 165,1 22,2 92,1 84,1 60,3 52,6 69,8 127,0 8 19,0 3,600
2 1/2″ 190,5 25,4 104,8 100,0 73,1 62,7 76,2 149,2 8 22,2 5,400
3″ 209,5 28,6 127,0 117,5 88,9 78,0 79,4 168,3 8 22,2 7,400
3 1/2″ 228,6 30,2 139,7 133,3 101,6 90,2 81,0 184,1 8 22,2 8,900
4″ 254,0 31,7 157,2 146,0 114,3 102,4 85,7 200,0 8 22,2 11,900
5″ 279,4 34,9 185,7 177,8 141,2 128,3 98,4 234,9 8 22,2 16,000
6″ 317,5 36,5 215,9 206,4 168,4 154,2 98,4 269,9 12 22,2 20,200
8″ 381,0 41,3 269,9 260,3 219,1 202,7 111,1 330,2 12 25,4 31,000
10″ 444,5 47,6 323,4 320,7 273,0 254,5 117,5 387,3 16 28,6 44,300
12″ 520,7 50,8 381,0 374,6 323,8 304,8 130,2 450,8 16 31,7 64,000
14″ 584,2 54,0 412,7 425,4 355,6 336,5 142,9 514,3 20 31,7 88,000
16″ 647,7 57,1 469,9 482,6 406,4 387,3 146,0 571,5 20 34,9 113,000
18″ 711,2 60,3 533,4 533,4 457,2 438,1 158,7 628,6 24 34,9 134,000
20″ 774,7 63,5 584,2 587,4 508,0 488,9 161,9 685,8 24 34,9 171,000
22″ 838,2 66,7 641,2 641,2 558,8 539,7 165,1 742,9 24 41,3 195,000
24″ 914,4 69,8 692,1 701,7 609,6 590,5 168,3 812,8 24 41,3 238,000
* The data “J” corresponds to the STD schedule
NOTE:
1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
6. Welding Neck Flange Bore Size SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100, SCH 120, SCH140, SCH160, XS

PT – PENETRATION TESTING

20181091828401311297 1 1 - Nonstandard ASME B16.5 A182 UNS S32750 WN RF Flange 6 Inch Sch80 CL300 RF=4MM

This method is used for detection of welding discontinuities (material discontinuities) appearing on the surface of a welded connector. This test is done following a visual testing of a welded connector and used mainly for both ferromagnetic and non-ferromagnetic materials.

Summary
nonstandard asme b16 5 a182 uns s32750 wn rf flange 6 inch sch80 cl300 rf4mm - Nonstandard ASME B16.5 A182 UNS S32750 WN RF Flange 6 Inch Sch80 CL300 RF=4MM
Author Rating
1star - Nonstandard ASME B16.5 A182 UNS S32750 WN RF Flange 6 Inch Sch80 CL300 RF=4MM1star - Nonstandard ASME B16.5 A182 UNS S32750 WN RF Flange 6 Inch Sch80 CL300 RF=4MM1star - Nonstandard ASME B16.5 A182 UNS S32750 WN RF Flange 6 Inch Sch80 CL300 RF=4MM1star - Nonstandard ASME B16.5 A182 UNS S32750 WN RF Flange 6 Inch Sch80 CL300 RF=4MM1star - Nonstandard ASME B16.5 A182 UNS S32750 WN RF Flange 6 Inch Sch80 CL300 RF=4MM
Aggregate Rating
5 based on 1 votes
Brand Name
Yaang
Name
Nonstandard ASME B16.5 A182 UNS S32750 WN RF Flange 6 Inch Sch80 CL300 RF=4MM
USD 1-9999
Product Availability
Pre-Order Only

Request a quote

Subject:

Products Related to Nonstandard ASME B16.5 A182 UNS S32750 WN RF Flange 6 Inch Sch80 CL300 RF=4MM

  • No related articles