Recently Shipment to Mid Asia Projects

Product Material

Special Alloys HASTELLOY® X MONEL® R-405 MONEL® K-500 HASTELLOY® C-276 HASTELLOY® C-22 HASTELLOY® B-2 INCOLOY® 825 INCOLOY® 800H / 800HT INCONEL® 718 INCONEL® ALLOY 625 INCONEL® ALLOY 601 MONEL® ALLOY 400 ALLOY 20 NICKEL 200/201 MONEL R-405 MONEL K-500 INCONEL ALLOY 600 HASTELLOY B3 Duplex Stainless Steel UNS S32760 LDX 2101 UNS S31803 UNS S32750 2205 Stainless Steel STAINLESS STEEL 410S STAINLESS STEEL 410 STAINLESS STEEL 304-304H STAINLESS STEEL 347 STAINLESS STEEL 309 STAINLESS STEEL 316-316l STAINLESS STEEL 321 317L STAINLESS STEEL STAINLESS STEEL 310/310S Stainless Steel 304 Titanium 10V-2Fe-3Al 6Al-4V 6Al-4V STA 6Al-4V ELI 6Al-2Sn-4Zr-2Mo

Recently Shipment to Mid Asia Projects

Material Standard

Material Standard ASTM A181 ASTM A181 /ASME SA181 Standard Specification for carbon steel forgings for general-purpose piping Material Grade Gr.60 Gr.70     ASTM A694 ASTM A694 /ASME SA694 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service Material Grade F42 F46 F48 F52 F56 F60 F65 F70     ASTM A336 ASTM A336/ ASME SA336 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts Material Grade F1 F11, Class 2 F11, Class 3 F11, Class 1 F12 F3VCb F22V F5 F5A F9 F6 F6NM F21, Class 3 […]

Recently Shipment to Mid Asia Projects

Stainless Steel 304

Stainless Steel 304 304 is the original “18-8” stainless. It is produced in greater quantity than any other austenitic stainless steel. 304 provides useful resistance to corrosion in many environments ranging from moderately reducing to moderately oxidizing. Through the controlled addition of nitrogen, it is common for 304L to meet the mechanical properties of 304 straight grade. As a result, most products are dual certified as 304 and 304/304L. Chemistry   Ni Cr Mn Si C S P N Fe MIN 8.0 18.0 – – – – – – – MAX 10.5 20.0 2.0 0.75 0.03 0.03 0.045 0.10 Balance […]

Recently Shipment to Mid Asia Projects

STAINLESS STEEL 310/310S

STAINLESS STEEL 310/310S  ASTM A 240, A 276, A 312 UNS S31000 / UNS S31008 DIN 1.4845 What forms of 310/310S Stainless Steel are available? • Sheet • Plate • Bar • Pipe & Tube • Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples) • Weld Wire 310/310S Stainless Steel Overview Stainless steel 310/310S is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000° F. Its high chromium and nickel contents provide comparable corrosion resistance, superior resistance to oxidation […]

Recently Shipment to Mid Asia Projects

317L STAINLESS STEEL

317L STAINLESS STEEL  UNS S31703 Forms of 317L Stainless Steel Available • Sheet • Plate • Bar • Pipe & Tube (welded & seamless) • Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples) • Welding Wire and Welding Electrode 317L Stainless Steel Overview 317L is a molybdenum bearing, low carbon content “L” grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes. 317L is non-magnetic in the annealed […]

Recently Shipment to Mid Asia Projects

STAINLESS STEEL 321

STAINLESS STEEL 321  UNS S32100 ASTM A 240, A 479, A 276 321 Stainless is available in the following forms • Sheet • Plate • Bar • Pipe & Tube • Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples) • Weld Wire 321 Stainless Steel Overview Stainless 321 is a heat resistant, titanium stabilized, austenitic alloy that’s commonly used for service in the 1000°-1600°F temperature range. 321 stainless is primarily used in applications that involve continuous and intermittent service temperatures within the carbide precipitation range of […]

Recently Shipment to Mid Asia Projects

STAINLESS STEEL 316-316l

STAINLESS STEEL 316-316l   Ni Cr Mo Mn Si C S P N Fe MIN 10.0 16.0 2.0 – – – – – – – MAX 14.0 18.0 3.0 2.0 0.75 0.03 0.03 0.045 0.1 Balance 316/316L is the most commonly used austenitic stainless steel in the chemical process industry. The addition of molybdenum increases general corrosion resistance, improves chloride pitting resistance and strengthens the alloy in high temperature service. Through the controlled addition of nitrogen it is common for 316/316L to meet the mechanical properties of 316 straight grade, while maintaining a low carbon content. Chemistry Specifications AMS 5507, AMS […]

Recently Shipment to Mid Asia Projects

STAINLESS STEEL 309

309 is an austenitic heat resistant alloy with oxidation resistance to 1900°F under constant temperature conditions. When frequent thermal cycling is involved, the alloy is resistant to about 1850°F. The high chromium and relatively low nickel content of 309 provide good resistance to high temperature sulfur bearing atmospheres. 309 has only moderate resistance to carbon absorption and is not suggested for use in highly carburizing atmospheres. Often in many product forms, the grain size and carbon content can meet both the 309S and 309H requirements. Prolonged exposure to the 1100-1600°F temperature range will cause some sigma to form, lowering room […]

Recently Shipment to Mid Asia Projects

STAINLESS STEEL 347

347 stainless steel has slightly improved corrosion resistance over type 321 stainless steel in strongly oxidizing environments. Type 347 is stabilized with columbium, it is preferable for aqueous and low temperature environments due to its good resistance to intergranular attack. Both 347 and 321 offer good resistance to polythionic acid stress corrosion cracking, encountered in oil refineries. The high temperature oxidation resistance of 347 is similar to that of 304 stainless steel. Useful to 1500°F.  Often in many product forms, the grain size and carbon content can meet both the 347S and 347H requirements. Appropriate weld fillers are AWS ER347 […]

Recently Shipment to Mid Asia Projects

STAINLESS STEEL 304-304H

Dual certified 304/304H is used as a material of construction up to 1500°F. Slight scaling begins at about 1200°F. This is the 0.04% minimum carbon version of type 304 stainless. It has general corrosion resistance similar to the low carbon 304/304L. However, it is subject to carbide precipitation in the heat affected zone (HAZ) of welds. Weldments may be sensitive to HAZ intergranular corrosion in oxidizing acid environments, and to polythionic acid stress corrosion cracking. The carbide precipitation is not harmful to high temperature mechanical properties.  304/304H is welded using the 22Cr 11Ni filler wire (ER308), or covered electrodes (E308). […]