Short Description

Model No.: UNS-S31603-Plate-Flange-RF-24"-Class600

China Plate Flange Manufacturer www.metallicsteel.com offers ASME B16.5 ASTM A182 UNS S31603 Plate Flange RF, 24″, Class600.

Request a quote Share

Key Specifications / Features

Type: UNS S31603 Plate Flange
Material: F316L (UNS S31603)
Size: DN600 (24″)
Standard: ASME B16.5
Pressure Class: 600 LB (Class 600)
Ends: Raised Face (RF)

Chemical Composition and Mechanical Property for 316L

Steel Grade

Chemical Composition

Mechanical Performance

C(Max)

Si(Max)

Mn(Max)

P(Max)

S(Max)

Ni

Cr

N(Max)

Mo

Tensile Strength
(Min)

Yield Strength
(Min)

Mpa

Mpa

316L

0.03

0.75

2.00

0.045

0.03

10.0–14.0

16.0–18.0

0.1

2.00–3.00

485

170

20200805020925 35694 - ASME B16.5 ASTM A182 UNS S31603 Plate Flange RF 24" Class600

ANSI/ ASME B16.5 Plate Ring Flange Raised Face

ANSI, ASME, ASA, B16.5 150lb/sq.in. Plate Ring Flange RF
ø D b g m J k Holes l Kg.
1/2″ 88,9 11,1 34,9 30,2 22,3 60,3 4 15,9 0,400
3/4″ 98,4 12,7 42,9 38,1 27,7 69,8 4 15,9 0,700
1″ 107,9 14,3 50,8 49,2 34,5 79,4 4 15,9 0,800
1 1/4″ 117,5 15,9 63,5 58,8 43,2 88,9 4 15,9 1,100
1 1/2″ 127,0 17,5 73,0 65,1 49,5 98,4 4 15,9 1,400
2″ 152,4 19,0 92,1 77,8 62,0 120,6 4 19,0 2,200
2 1/2″ 177,8 22,2 104,8 90,5 74,7 139,7 4 19,0 3,600
3″ 190,5 23,8 127,0 107,9 90,7 152,4 4 19,0 4,100
3 1/2″ 215,9 23,8 139,7 122,2 103,4 177,8 8 19,0 5,200
4″ 228,6 23,8 157,2 134,9 116,1 190,5 8 19,0 5,600
5″ 254,0 23,8 185,7 163,6 143,8 215,9 8 22,2 6,300
6″ 279,4 25,4 215,9 192,1 170,7 241,3 8 22,2 7,500
8″ 342,9 28,6 269,9 246,1 221,5 298,4 8 22,2 12,600
10″ 406,4 30,2 323,8 304,8 276,3 361,9 12 25,4 18,500
12″ 482,6 31,7 381,0 365,1 327,1 431,8 12 25,5 28,000
14″ 533,4 34,9 412,7 400,0 359,1 476,2 12 28,6 36,000
16″ 596,9 36,5 469,9 457,2 410,5 539,7 16 28,6 46,000
18″ 635,0 39,7 533,4 504,8 461,8 577,8 16 31,7 50,000
20″ 698,5 42,9 584,2 558,8 513,1 635,0 20 31,7 64,000
22″ 749,3 46,0 641,2 609,6 564,4 692,1 20 34,9 72,000
24″ 812,8 47,6 692,1 663,6 615,9 749,3 20 34,9 89,000

NOTE:

1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

ANSI, ASME, ASA, B16.5 300lb/sq.in. Plain flange/Plate Flange RF
ø D b g m J k Holes l Kg.
1/2″ 95,6 14,3 34,9 38,1 22,3 66,7 4 15,9 0,700
3/4″ 117,5 15,9 42,9 47,6 27,7 82,5 4 19,0 1,100
1″ 123,8 17,5 50,8 54,0 34,5 88,9 4 19,0 1,400
1 1/4″ 133,3 19,0 63,5 63,5 43,2 98,4 4 19,0 1,800
1 1/2″ 155,6 20,6 73,0 69,8 49,5 114,3 4 22,2 2,600
2″ 165,1 22,2 92,1 84,1 62,0 127,0 8 19,0 3,400
2 1/2″ 190,5 25,4 104,8 100,0 74,7 149,2 8 22,2 4,400
3″ 209,5 28,6 127,0 117,5 90,7 168,3 8 22,2 6,100
3 1/2″ 228,6 30,2 139,7 133,3 103,4 184,1 8 22,2 7,500
4″ 254,0 31,7 157,2 146,0 116,1 200,0 8 22,2 10,100
5″ 279,4 34,9 185,7 177,8 143,8 234,9 8 22,2 12,500
6″ 317,5 36,5 215,9 206,4 170,7 269,9 12 22,2 14,100
8″ 381,0 41,3 269,9 260,3 221,5 330,2 12 25,4 24,800
10″ 444,5 47,6 323,8 320,7 276,3 387,3 16 28,6 37,100
12″ 520,7 50,8 381,0 374,6 327,1 450,8 16 31,7 50,000
14″ 584,2 54,0 412,7 425,4 359,1 514,3 20 31,7 70,000
16″ 647,7 57,1 469,9 482,6 410,5 571,5 20 34,9 90,000
18″ 711,2 60,3 533,4 533,4 461,8 628,6 24 34,9 112,000
20″ 774,7 63,5 584,2 584,2 513,1 685,8 24 34,9 133,000
22″ 838,2 66,7 641,2 641,2 564,4 742,9 24 41,3 197,000
24″ 914,4 69,8 692,1 701,7 615,9 812,8 24 41,3 208,000

NOTE:

1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

ANSI, ASME, ASA, B16.5 600lb/sq.in. Plate Flange RF
ø D b g m J k Holes l Kg.
1/2″ 95,2 14,3 34,9 38,1 22,3 66,7 4 15,9 0,800
3/4″ 117,5 15,9 42,9 47,6 27,7 82,5 4 19,0 1,400
1″ 123,8 17,5 50,8 54,0 34,5 88,9 4 19,0 1,600
1 1/4″ 133,3 20,6 63,5 63,5 43,2 98,4 4 19,0 2,100
1 1/2″ 155,6 22,2 73,0 69,8 49,5 114,3 4 22,2 3,100
2″ 165,1 25,4 92,1 84,1 62,0 127,0 8 19,0 3,700
2 1/2″ 190,5 28,6 104,8 100,0 74,7 149,2 8 22,2 5,400
3″ 209,5 31,7 127,0 117,5 90,7 168,3 8 22,2 7,300
3 1/2″ 228,6 34,9 139,7 133,3 103,4 184,1 8 25,4 8,900
4″ 273,0 38,1 157,2 152,4 116,1 215,9 8 25,4 11,800
5″ 330,2 44,4 185,7 188,9 143,8 266,7 8 28,6 24,500
6″ 355,6 47,6 215,9 222,2 170,7 292,1 12 28,6 29,500
8″ 419,1 55,6 269,9 273,0 221,5 349,2 12 31,7 43,000
10″ 508,0 63,5 323,8 342,8 276,3 431,8 16 34,9 70,000
12″ 558,8 66,7 381,0 400,0 327,1 488,9 20 34,9 86,000
14″ 603,2 69,8 412,7 431,8 359,1 527,0 20 38,1 100,000
16″ 685,8 76,2 469,9 495,3 410,5 603,2 20 41,3 142,000
18″ 742,9 82,5 533,4 546,1 461,8 654,0 20 44,4 175,000
20″ 812,8 88,9 584,2 609,6 513,1 723,9 24 44,4 232,000
22″ 869,9 95,2 641,2 666,7 564,4 777,9 24 47,6 292,000
24″ 939,8 101,6 692,1 717,5 615,9 838,2 24 50,8 330,000

NOTE:
1. Class 600 flanges except Lap Joint will be furnished with 0.25 (6.35mm) raised face, which is not included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).

2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Dimensions of sizes 1/2 through 3 1/2 are the same as for Class 400 Flanges.
6. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

Application

  • Bicycle and automobile exhaust tubing, cooling pipe, Electroplating equipment, precision instruments, ring, environmental protection equipment
  • Thermal power engineering:condenser, heat exchanger, engine vane
  • Vessels:Running pipes, submersible, gas cylinder
  • Oceaneering: evaporator, heat transmitter, exchanger, oil production platform, oil cooler
  • Chemical engineering:Flat plate heat exchanger, flat plate condenser, cooler tower, chloride barrels
  • Aerospace:Engine, fan plate, gas compressor vane, rack, hatch cover, empennage

Summary
asme b16 5 astm a182 uns s31603 plate flange rf 24 class600 - ASME B16.5 ASTM A182 UNS S31603 Plate Flange RF 24" Class600
Author Rating
1star - ASME B16.5 ASTM A182 UNS S31603 Plate Flange RF 24" Class6001star - ASME B16.5 ASTM A182 UNS S31603 Plate Flange RF 24" Class6001star - ASME B16.5 ASTM A182 UNS S31603 Plate Flange RF 24" Class6001star - ASME B16.5 ASTM A182 UNS S31603 Plate Flange RF 24" Class6001star - ASME B16.5 ASTM A182 UNS S31603 Plate Flange RF 24" Class600
Aggregate Rating
5 based on 1 votes
Brand Name
Yaang
Name
ASME B16.5 ASTM A182 UNS S31603 Plate Flange RF 24" Class600
USD 1-9999
Product Availability
Pre-Order Only

Request a quote

Subject:

Products Related to ASME B16.5 ASTM A182 UNS S31603 Plate Flange RF 24″ Class600