ANSI B16.9 ASTM A403 WP304 ECC RED 6 Inch – 4 Inch SCH10S

Type: ECC RED
Schedule: SCH10S 
Material: 304
Ends: BW
Standard: ANSI B16.9
Size: 6 Inch – 4 Inch

Composition ranges for 304 grade stainless steel

Grade		C	Mn	Si	P	S	Cr	Mo	Ni	N
304	min. max.	– 0.08	– 2.0	– 0.75	– 0.045	– 0.030	18.0 20.0	–	8.0 10.5	– 0.10
304L	min. max.	– 0.030	– 2.0	– 0.75	– 0.045	– 0.030	18.0 20.0	–	8.0 12.0	– 0.10
304H	min. max.	0.04 0.10	– 2.0	– 0.75	-0.045	– 0.030	18.0 20.0	–	8.0 10.5	–

Mechanical properties of 304 grade stainless steel

Grade	Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min	Hardness
				Rockwell B (HR B) max	Brinell (HB) max
304	515	205	40	92	201
304L	485	170	40	92	201
304H	515	205	40	92	201
304H also has a requirement for a grain size of ASTM No 7 or coarser.

Physical properties of 304 grade stainless steel in the annealed condition

Grade	Density (kg/m3)	Elastic Modulus (GPa)	Mean Coefficient of Thermal Expansion (μm/m/°C)			Thermal Conductivity (W/m.K)		Specific Heat 0-100°C (J/kg.K)	Electrical Resistivity (nΩ.m)
			0-100°C	0-315°C	0-538°C	at 100°C	at 500°C
304/L/H	8000	193	17.2	17.8	18.4	16.2	21.5	500	720

Grade specifications for 304 grade stainless steel

Grade	UNS No	Old British		Euronorm		Swedish SS	Japanese JIS
		BS	En	No	Name
304	S30400	304S31	58E	1.4301	X5CrNi18-10	2332	SUS 304
304L	S30403	304S11	–	1.4306	X2CrNi19-11	2352	SUS 304L
304H	S30409	304S51	–	1.4948	X6CrNi18-11	–	–
These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.