Short Description

Model No.: F304-SORF-Flange-DN80-CLass-150

China Slip On Flange Manufacturer www.metallicsteel.com offers ANSI B16.5 A182 F304 SORF Flange, DN80, CLass 150.

Request a quote Share

Key Specifications / Features

Type: 304 SORF Flange
Material: 304
Size: 3″  (DN80)
Class: 150#
Standard: ANSI B16.5

Chemical Composition and Mechanical Property for 304/304L

Steel Grade

Chemical Composition

Mechanical Performance

C(Max)

Si(Max)

Mn(Max)

P(Max)

S(Max)

Ni

Cr

N

Mo

Tensile Strength
(Min)

Yield Strength
(Min)

Mpa

Mpa

304

0.08

0.75

2.00

0.045

0.03

8.0–10.5

18.0–20.0

0.1

/

515

205

304L

0.03

0.75

2.00

0.045

0.03

8.0–12.0

18.0–20.0

0.1

/

485

170

2018103192541560824 - ANSI B16.5 A182 F304 SORF Flange DN80 CLass 150

Flange Dimensions & Approximate Masses
ANSI, ASME, ASA, B16.5 150lb/sq.in. SLIP ON FLANGE RF / FF
ø D b g m J h k Holes l Kg.
1/2″ 88,9 11,1 34,9 30,2 22,3 15,9 60,3 4 15,9 0,400
3/4″ 98,4 12,7 42,9 38,1 27,7 15,9 69,8 4 15,9 0,700
1″ 107,9 14,3 50,8 49,2 34,5 17,5 79,4 4 15,9 0,800
1 1/4″ 117,5 15,9 63,5 58,8 43,2 20,6 88,9 4 15,9 1,100
1 1/2″ 127,0 17,5 73,0 65,1 49,5 22,2 98,4 4 15,9 1,400
2″ 152,4 19,0 92,1 77,8 62,0 25,4 120,6 4 19,0 2,200
2 1/2″ 177,8 22,2 104,8 90,5 74,7 28,6 139,7 4 19,0 3,600
3″ 190,5 23,8 127,0 107,9 90,7 30,2 152,4 4 19,0 4,100
3 1/2″ 215,9 23,8 139,7 122,2 103,4 31,7 177,8 8 19,0 5,200
4″ 228,6 23,8 157,2 134,9 116,1 33,3 190,5 8 19,0 5,600
5″ 254,0 23,8 185,7 163,6 143,8 36,5 215,9 8 22,2 6,300
6″ 279,4 25,4 215,9 192,1 170,7 39,7 241,3 8 22,2 7,500
8″ 342,9 28,6 269,9 246,1 221,5 44,4 298,4 8 22,2 12,600
10″ 406,4 30,2 323,8 304,8 276,3 49,2 361,9 12 25,4 18,500
12″ 482,6 31,7 381,0 365,1 327,1 55,6 431,8 12 25,5 28,000
14″ 533,4 34,9 412,7 400,0 359,1 57,1 476,2 12 28,6 36,000
16″ 596,9 36,5 469,9 457,2 410,5 63,5 539,7 16 28,6 46,000
18″ 635,0 39,7 533,4 504,8 461,8 68,3 577,8 16 31,7 50,000
20″ 698,5 42,9 584,2 558,8 513,1 73,0 635,0 20 31,7 64,000
22″ 749,3 46,0 641,2 609,6 564,4 79,4 692,1 20 34,9 72,000
24″ 812,8 47,6 692,1 663,6 615,9 82,5 749,3 20 34,9 89,000
NOTE:
1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

Request a quote

Subject:

Products Related to ANSI B16.5 A182 F304 SORF Flange DN80 CLass 150